Pages

Monday, December 14, 2015

Darth Vader voice changer 2.0: designing the case

The first voice changer that I made had a handmade 1/2" thick plywood case. Making it was very time-consuming and it's a bit heavy. I felt I could do better. This year I got interested in laser cutting but until now I only read about it. The laser cutter isn't as widespread as the 3D-printer. The laser optics combined with the CNC bring a whole range of possibilities when compared to creating by hand. First of all you can design with a computer and then send your file to the laser cutter greatly increasing the precision of the case. Second I can make casings that I never thought were feasible, e.g. it is possible to curve the wood by cutting in certain patterns, make complex wood joints normally the territory of professional carpenters or create detailed engravings in just minutes, just to name a few.

In the area where I live there is a FabLab that provides me the possibility to use their laser cutters for a modest fee. I've already been there to test the equipment.
To create a case I started with an online tool called Makercase. It's an easy to use tool that, once you've entered the parameters on length, width, thickness etc, provides you with an svg-file. The svg-file can be opened and changed in Inkscape, a free vector drawing program. Adobe Illustrator and Corel Draw are fine too but they are expensive and proprietary programs. Inkscape has a learning curve so I have spend the better part of the week to get acquainted with the program. I nevertheless made good progress and hopefully I'll be able to have the case ready this week.

Image of the by Makecase generated svg-file. I choose the T-slot design and a thickness 1/4". This is half the thickness that I used for the earlier version of the Darth Vader voice changer.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.